Fairy Ring

Vibe CAD for real things / talk, point, and it gets made

One hundred things made in Fairy Ring, knolled: tables, stools, benches, cases, finger-jointed boxes and trays, mycelium trays, and concrete, clay, wax and glow vessels

Put on a Quest and say what's in your head. “Taper the legs this much.” “Spin it like this.” The model changes live, full size in the room, while your hands show the sizes. When it's right, Fairy Ring makes it: cut files with the joints already solved, printable molds, a build plan with a cut list, a parts cart, and a job for whichever dancer in the ring can do it. Nothing is ever bought without you.

0.1 ssimple edits
2Quests
24machines in the ring
0CAD experience needed

How it works

Say it / see it / make it

01SAY IT, SHOW ITpush-to-talk on the padhands tracked by the Quest“taper the legs this much”02FAIRY RINGsimple edits: about 0.1 sanything else: Claudeboth call the CAD engine03SEE ITfull size in the roomghost preview in the Questlive on the ultrawidewords + hands0.1–0.8 s“there.” · “save this as the tall one” · undo“make it”04CUT FILESxTool, box joints05MOLDSpour, grow, wax06BUILD PLANcut list + steps07CARTSnever bought08MACHINESprinters, lasers
01SAY IT, SHOW ITpush-to-talk on the padhands tracked by the Quest“taper the legs this much”02FAIRY RINGsimple edits: about 0.1 sanything else: Claudeboth call the CAD engine03SEE ITfull size in the roomghost preview in the Questlive on the ultrawide“make it”04CUT FILESxTool, box joints05MOLDSpour, grow, wax06BUILD PLANcut list + steps07CARTSnever bought08MACHINESprinters, lasers
  1. Say it, show it. Hold TALK (or step on the foot pedal) and talk. Hands fill in the numbers: “this wide” reads the gap between your palms, and the edit commits when your hand holds still or you say “there.”
  2. Fairy Ring edits. Simple commands skip the AI and land in a tenth of a second. Anything else goes to Claude, which calls the same CAD tools. Every edit is a saved version, so undo is free.
  3. Make it. Cut files with box joints and kerf, molds sized to the printer bed, a build plan you walk with “next step,” carts grouped by vendor, and jobs routed to the machines below.

The two Quests

One on your head / one on the rail

AQUEST YOU WEARpassthrough: model in your roomhands: “this much”, “this way”ghost until your hand holds stillBTHE TOWERspeech-to-text on the 4090Claude agent + CAD engineUnity Preview on the ultrawideCQUEST ON THE RAILupside down, strap offits cameras watch the bench+ 2 webcams: the camera wallWi-FiUSBDANCHOR TAGS6 in AprilTag cards on the bench,machines and every blank: true scale
AQUEST YOU WEARpassthrough: model in your roomhands: “this much”, “this way”ghost until your hand holds stillBTHE TOWERspeech-to-text on the 4090Claude agent + CAD engineUnity Preview on the ultrawideCQUEST ON THE RAILupside down, strap offits cameras watch the bench+ 2 webcams: the camera wallDANCHOR TAGS6 in AprilTag cards on the bench,machines and every blank: true scale
  1. The one you wear. Passthrough puts the model in the room at true size. Hand tracking turns gestures into dimensions, with a ghost preview until you commit.
  2. The one on the rail. Mounted upside down with the strap off, it becomes a room camera. With two webcams it feeds the camera wall, so Fairy Ring can see the bench, the boards and the molds.
  3. Anchor tags. Six-inch AprilTag cards on the bench, the machines and every rough-milled blank tie both headsets to the real room, so a scanned board and a model line up to the millimetre.

Where the work goes

Fairy Ring designs it / the dancers make it

00 / Design
Fairy RingSay it, show it, see it full size. Then “make it.”
01 / Scan in
VogueScans of objects, molds and parts
02 / Cut and draw
xTool P3Borrowed from a friend. Cuts and engraves the flat work
Drag QueenVeneer cut files
Lady LinerLayout lines and templates
MortishaJoinery toolpaths
Lathe MinnelliTurning profiles
03 / Form
Form 4New. Prints the Castable Wax patterns for Sterling Silva
Queen BeeWax prints for casting
MotherGrow molds
Mud DivaClay and concrete cores
Slip KittenPlaster molds to slip-cast
Pour DecisionsConcrete and resin pours to settle
Skin TightVacuum-formed trays and covers
Cher BendBending forms cut from a curve
Bog WitchLiving moss panels
Hot FlashBake, burnout and drying schedules
Sterling SilvaWax trees for silver casting
04 / Finish
Flex AppealVeneer and bent-lamination presses
Honey GlazeGlue lines and finish passes
Sandra PaperSanding passes
Glow DivaGlow fill paths
Cane-DaceWeaving patterns
05 / Serve
HandmaidenPlate swaps and sheet loading
Dusty SpringfieldWhich gates to open
Moisture MadameBoards to dry and weigh
06 / Recycle
LazarellaFailed prints and wax scraps
On the road
The rigThe tower, monitors, battery and cameras in one rolling case.

See every machine, with parts and files →

One piece, start to finish

A walnut stool / from a sentence to a finished piece

  1. Say it. “A three-legged stool, 18 inches tall, walnut seat, splayed legs.” Fairy Ring builds it live in the room.
  2. Show it. Hands set the seat width and the splay. “Thinner.” “There.” Every change is saved.
  3. See it. Walk around it at full size. Sit on a real chair beside it to check the height.
  4. Make it. Fairy Ring writes the cut list, the leg tenons for Mortisha, a seat veneer pattern for Drag Queen, layout lines for Lady Liner, and a cart for the walnut.
  5. Build it. Mortisha cuts the joints. Drag Queen and Flex Appeal lay the veneer. Honey Glaze glues and oils it. “Next step” walks you through the rest.
  6. Keep it. Vogue scans the finished stool for the site, and every offcut is logged for the next piece.

Hands

Six gestures / show the size instead of saying it

Span gestureSpantwo hands

“Make it this wide.” Hold both hands up. The gap between your two index fingertips becomes the size, taken literally. Turn your hands upright for “this tall.”

Pinch gesturePinchone hand

“Taper the legs this much.” Open your thumb and index finger. Closed is the smallest the setting goes and 4 3/4 in apart is the largest.

Drag gestureDragone finger

“Move it this way.” Point and slide your index finger. The part follows the fingertip.

Twist gestureTwistone wrist

“Spin it like this.” Turn your wrist. Turning it flat spins the model; rolling it sets an angle such as leg splay.

Hold still gestureHold stillcommit

A ghost of the change follows your hand live. Hold still for under a second and it commits.

Say “there” gestureSay “there”commit

Or say “there” or “done” to commit right away. Say “undo” to take it back.

Keys and dials

Three custom boards: MAKE, LOOK and SHAPE / every key, and what it does

MAKE / talk, keep, steps, makers

Drag Queenveneer
Mortishajoints
Queen Beewax
Mothergrow
Mud Divaclay
Make mold
Print it
Voguescan
Add to cartnever buys
ExportSTEP, STL, GLB
Checkfit, walls
Parts + cost
Machineswhat's running
Cut files
Wax checkjewelry
Stepback
Stepnext
Which step
First stepstart over
Plan build
Isolateonly this part
Show all
Measuresay the size
Spin
Stop
Redo
Saveversion
Mirror
Duplicate
Deleteselected
Talkhold and speak
Therekeep it
Undo

LOOK / the view and the jewelry trays

DONE
WIDTH 18 in
Zoom
Open up
Cut
Browse
Chains
Stones
Clasps
Bails
Jump rings
Clip blanks
Poststitanium
Barbells
Buckleshardware
Ear wires
What fitshere
Find stonessearch only
Add to traykeep this
Take outof tray
Close tray
Front
Side
Top
Angle3/4 view
My viewhold to save

SHAPE / change the selected part

Height
Width
Depth
Thickness
Round edges
Bevel edges
How many
Draft
Versions
Partback
Wholemodel
Partnext
SHAPE dials, turn
Each of the nine dials changes one thing on the selected part, one small step per click: about 3%, rounded to 1/16 in.
SHAPE dials, press
Height, width, depth and thickness read the size aloud. The edge, count and draft dials undo. VERSIONS saves one.
LOOK sliders
Three 2 3/8 in sliders: ZOOM moves the view near or far, OPEN UP explodes the model, CUT slices it to see inside.
LOOK browse wheel
The 2 in wheel flips through the open jewelry tray; press it to pick. With no tray open it turns the view.
LOOK screen
A 2 in screen says in big letters what just happened, so you never need the headset to check.
Foot pedal
Plugs into MAKE. Left pedal is TALK, right pedal is THERE, so both hands stay on the piece.
Lights and beeps
Every key glows in its group's colour, then flashes green for done or amber for “not for this piece,” with a beep.

Every key works on any model. When a key doesn’t fit, Fairy Ring says so (“This model has no repeating pattern”). Red keys talk and keep, the orange key undoes, and keys outlined in red delete or take out. You never need the headset on to use the boards.

Things you can say

A cheat sheet / plain words, no menus

“Make it 20 percent taller.”Scales one direction.
“This wide.”Reads the gap between your hands.
“Taper the legs to an inch at the foot.”Named part, named size.
“Round the edges a quarter inch.”Fillets every outside edge.
“Box joints on all four corners.”Solves the joints for the sheet and the kerf.
“Show me it in cherry.”Swaps the material look.
“Undo.” / “Go back three.”Every edit is a version.
“Make the mother mold.”Writes a Mother grow mold for the shape.
“Print it in wax.”Sends it to Queen Bee with the casting blend.
“What does it cost?”Parts and material total, nothing bought.
“Next step.”Walks the build plan.
“Send it to the ring.”Splits the job across the dancers.

Materials in the ring

What Fairy Ring knows how to make things from

Hardwood
Walnut, maple, cherry, oak. Joinery on Mortisha, finish on Honey Glaze.
Veneer
Figured and rare woods, cut on Drag Queen, laid in Flex Appeal.
Plywood
Baltic birch for jigs, carcasses and the rig.
Beeswax
Printed on Queen Bee, for objects or for casting.
Mycelium
Grown on Mother, for shapes, packaging and insulating forms.
Clay
Printed on Mud Diva, as pots or as reusable formwork.
Concrete
Fine cement paste, printed or poured into clay.
PETG and HIPS
Vacuum-formed by Skin Tight for trays, covers and molds.
PLA
Printed parts, and back to filament through Lazarella.
Acrylic
Cut on the xTool for cradles, guards and display.

Recipes for wax, mycelium, clay, concrete, glue and plastic are on each machine →

How mycelium works

The living glue behind Mother / from one thread to a fairy ring

The body of a fungus
The body of a fungusThe mushroom is just fruit. The fungus is this mat of white threads.
It glues as it eats
It glues as it eatsFed, it knits loose grounds into one solid piece. Mother does this.
Threads called hyphae
Threads called hyphaeEach thread, a hypha, is one cell wide and grows from its tip.
The forest's recyclers
The forest's recyclersIn leaf litter the same threads break dead wood back into soil.
Cables between meals
Cables between mealsBundled into dark cords, hyphae travel between food sources.
Trading with plants
Trading with plantsHyphae grow into plant roots and trade minerals for sugar.
A fairy ring
A fairy ringIt grows outward from one spot, so it shows in lawns as a ring.
The dancers come up after rain
The dancers come up after rainAfter rain the ring fruits: Marasmius oreades.
Fruiting on purpose
Fruiting on purposeGrowers colonize a bag of substrate, then add humidity and air.
Gills hold the spores
Gills hold the sporesThin gills under the cap carry billions of spores.
A spore print
A spore printLeft on paper overnight, falling spores draw the cap.
Some of it glows
Some of it glowsFoxfire: wood full of fungus that glows green in the dark.
Grown, not cut
Grown, not cutPacked in a mold and dried, it becomes a light, tough material.
Big enough to stand in
Big enough to stand inGrown blocks stack like bricks into a building.

Photos via Wikimedia Commons, left to right: 1 Tobi Kellner (CC BY-SA 3.0); 2 Tobi Kellner (CC BY-SA 3.0); 3 Emilio Bosch (CC BY-SA 4.0); 4 PerytonMango (CC BY-SA 4.0); 5 Lamiot (CC BY-SA 4.0); 6 Rajarshi Rit (CC BY 4.0); 7 Edward O. Uthman (CC BY-SA 4.0); 8 Karel Adriaan (CC BY-SA 4.0); 9 Chatama (Public domain); 10 Kieran Roy Powell (CC BY 4.0); 11 The High Fin Sperm Whale (CC BY-SA 3.0); 12 Bruce McAdam (CC BY-SA 2.0); 13 Mycobond (CC BY-SA 2.0); 14 SnowFire (CC BY 4.0).

How bees make wax

The material behind Queen Bee / from flower to block

Wax starts as flowers
Wax starts as flowersForagers bring nectar home. Honey is the fuel bees burn to make wax.
Made by the bee's body
Made by the bee's bodyYoung workers secrete wax as tiny clear flakes from glands under the belly.
Building in the open
Building in the openClustered for warmth, they chew the flakes soft and press them into cells.
A head start
A head startBeekeepers hang a pressed wax sheet so bees start straight.
Why hexagons
Why hexagonsHexagons tile with no gaps and use the least wall for the most space.
Capped and ripe
Capped and ripeRipe honey gets a fresh wax cap. Those cappings are the cleanest wax.
Rendering
RenderingCappings and old comb are melted, strained and poured into blocks.
What Queen Bee prints with
What Queen Bee prints withBeeswax melts near 145 °F and sets in seconds. Queen Bee prints with it.

Photos via Wikimedia Commons, left to right: 1 Krigore (CC BY-SA 4.0); 2 Waugsberg (CC BY 2.5); 3 Oshadhi Jayasena (CC BY-SA 4.0); 4 AxelHH (CC BY 3.0); 5 Øyvind Holmstad (CC BY-SA 4.0); 6 Joska16 (CC BY-SA 4.0); 7 Simon A. Eugster (CC BY-SA 3.0); 8 Mauro Cateb (CC BY-SA 3.0).

The rig

The PC on its own isolated chassis, two new monitors (a 34 in ultrawide and a 15.6 in camera screen), a battery and the cameras in one rolling flight case

The rig open: ultrawide in the lid, camera-wall screen on the right, the Quest and webcams on the rail, the Pocket 3 on its arm

One white box on four casters. Closed, it straps into the back of a Jeep. Open, the lid swings up with the ultrawide already in it, the camera-wall screen clips on the right, the camera Quest 3S and webcams sit on the rail across the top, and the three control boards (MAKE, LOOK and SHAPE) drop into pockets at desk height. An Osmo Pocket 3 on a magic arm films your hands and face from the right, and the DJI Mic 2 is the speech mic; both charge in a deck dock while the case is closed. The battery is a UPS: unplug it, roll it to another room, and the tower never shuts down.

$3,584parts, before tax
38 × 25 × 36 inclosed
~2 hFairy Ring on battery
180 lbloaded

How it works

Closed: a flight case / open: a workstation

Closed and latched / Open, side off: PC chassis right, battery bottom left
Closed and latchedOpen, side off: PC chassis right, battery bottom left
  1. Closed. Four draw latches, gasketed seams and down-facing hoods on every opening. Drip-resistant, not waterproof. Recessed D-rings strap it to the Jeep's tie-downs.
  2. Open. The lid rises on two gas struts to 100°. The camera-wall screen drops into two receivers, the Quest and webcams screw onto the lid rail, the Pocket 3's arm screws into a socket at the front-right corner, the control boards sit in the deck.
  3. Rolling. The Anker SOLIX switches over in under 10 ms. A travel router under a rear hood keeps the same network in every room; home Wi-Fi, a phone or Starlink just feed it.
The camera Quest 3S upside down in its acrylic cradle
The deck: the MAKE, LOOK and SHAPE boards and the DJI dock
The lid rail: Quest 3S between the two webcams
The Osmo Pocket 3 on its magic arm, at chest height off the right side
The PC on its own 3 mm aluminium chassis, floating on rubber isolators: Z790 board, RTX 4090, Kraken 280 and a 1000 W PSU
Close up: the 4090 held at both ends, DDR5 and the Kraken pump

Models in these renders: Meta Quest 3S by og_matter, casters by vector6, Z790 motherboard by AKIverse, RTX 4090 and DDR5 by PolyDavid (GPU, RAM) and the PSU by Igor.Jop, all CC BY 4.0 via Sketchfab.

What to buy

53 lines / $3,584.30 before tax / estimates from the design pass

Displays14%$499.00
Power19%$670.99
Network4%$128.00
Cooling6%$202.00
Frame8%$269.97
Skins7%$255.00
Wood3%$120.00
Hardware9%$327.54
Shock2%$82.00
Mounts1%$47.80
Capture2%$75.00
Chassis (SendCutSend)6%$220.00
Chassis2%$74.00
Controls17%$613.00
Parts total$3,584.30
Every part, by section (61 lines)

Hardware

Computer

Controls

Amazon01Right-angle (90 degree down) micro-USB to USB-A cable, 3.3 ft$24.00Qty 3 · One per control board (MAKE, LOOK, SHAPE). The plug turns down at the case's right wall and the lead drops through the pocket foam to the hub under the deckView on Amazon →Amazon024-port USB 3.0 hub with a 3.3 ft lead (USB-A)$15.00Under the deck: the three control-board cables plug in here, one lead runs to the computer's rear IOView on Amazon →jlcpcb.com03Custom control boards MAKE, LOOK and SHAPE: JLCPCB boards, bottom-side assembly, white FR4 top plates, combined shipping$265.00Qty 1 set · Three original boards designed for the rig. 5 bare boards + 5 plates per design, 2 assembled each. Gerbers, BOM and CPL in fairy-ring-controls/hardware/View on jlcpcb.com →Mouser04Control-board parts: 65 MX-style clicky/tactile switches, 11 Alps EC11E encoders, 3 PTA6043 2 3/8 in sliders + caps, 3 Raspberry Pi Picos, Waveshare 2 in LCD, stabilisers, buzzers, jack, header$109.00Qty 1 set · Hand-soldered. Full list in fairy-ring-controls/docs/parts_to_buy.csvView on Mouser →Amazon05Dual momentary foot pedal on a 0.138 in TRS plug$30.00Plugs into MAKE: left pedal TALK, right pedal THEREView on Amazon →Amazon06Control-board hardware: M2 heat-set inserts, M2 x 10 screws, 0.138 in spacers, rubber feet$10.00Qty 1 set · Plate + PCB into each caseView on Amazon →jlc3dp.com07Control-board cases, SLS PA12 (MAKE, LOOK, SHAPE)$105.00Qty 3 · 6 3/16 x 9 7/16-10 x 13/16 in, too big for the Form 4. STEP/STL in fairy-ring-controls/case/View on jlc3dp.com →formlabs.com08Keycaps, clear lids and knobs, Form 4 resin (about 300 ml)$55.00Qty 1 set · 1 1/32 in caps, 2u caps, 1 9/16 in caps, nine 1 1/4 in dial knobs, a 2 in jog knob; printed paper legends under clear lidsView on formlabs.com →

What to cut and print

ACM skins by a sign shop / acrylic on the xTool / SLS nylon sent out

Every cut part on one sheet
ACM skins, 12 panels0.12 in white Dibond, CNC routed from the DXFs with every hole and cutoutquote
Plywood floor, divider, cradle, shelf, sub-deck0.47 and 0.35 in Baltic birchin house
Acrylic, one sheetQuest cradle, camera-wall tray, arm and hooks, 0.24 inxTool
Rain hoods ×8SLS PA12, openings face down~$200
SSD caddy, rail adapters, receivers, Starlink clipsSLS PA12~$55
2020 frame, 26 pieces, 54.5 ftCut to length by Misumiin buy list

Print prices are rough per-part figures; Xometry will quote higher than JLC3DP. The sign shop needs a quote.

Build steps and numbers
  1. Measure first: the three control-board cases, the Quest visor height and the PC parts. Every size is a parameter at the top of rig.py.
  2. Have a sign shop route the ACM panels; cut the plywood parts from printouts.
  3. Assemble the 2020 frame with cast corner brackets. Body first, then lid.
  4. Bolt the casters through the floor, then the 0.12 in aluminium PC chassis on its rubber isolators.
  5. Skin the body with M5 button heads into drop-in T-nuts; fit the EPDM gasket.
  6. Mount fans, filters, hoods and the powerCON inlet; run the fans off a motherboard header.
  7. Hang the lid on the piano hinge with gas struts and the locking stay; mount the ultrawide.
  8. Laser cut the acrylic; glue the Quest cradle with Weld-On 4.
  9. Battery in its bay. Move the PC parts out of the NZXT case onto the chassis: board plate, GPU saddle, radiator and PSU clamps.
  10. Pull the plug with the PC under load and check it rides through.
~4 h
Idle with both monitors, about 200 W.
~2 h
Fairy Ring running, about 400 W.
~1.2 h
GPU flat out, about 700 W.
106 CFM
About 54 °F over room air at 700 W.
30.2 in
Deck height. The casters unbolt for the Jeep.

Anchor tags

Engraved and cut on the xTool / 24 cards

What’s on a tag

6.00 inABLACK SQUARE, EXACTLY 6 INIts known size gives the headsettrue scale and distance.B36 CELLS INSIDEA 36-bit code. This cardreads ID 203: leg 1.CFOUR CORNERSWhere they land in the cameragives the card’s position and tilt.DWHITE BORDERKeeps the edge clean so the squareis easy to find. Never clip it.
ABCD6.00 inABLACK SQUARE, EXACTLY 6 INIts known size gives the headsettrue scale and distance.B36 CELLS INSIDEA 36-bit code. This cardreads ID 203: leg 1.CFOUR CORNERSWhere they land in the cameragives the card’s position and tilt.DWHITE BORDERKeeps the edge clean so the squareis easy to find. Never clip it.

From scan to overlay

1SEEThe headset camera findsthe black square, evenat an angle.2203READThe 36 cells decode toan ID: 203 is leg 1of the side table.3PLACEFour corners plus theknown 6 in give its exactspot and angle in the room.4DRAWCut lines, mortises andthe finished ghost land onthe real board, full size.
1SEEThe headset camera findsthe black square, evenat an angle.2203READThe 36 cells decode toan ID: 203 is leg 1of the side table.3PLACEFour corners plus theknown 6 in give its exactspot and angle in the room.4DRAWCut lines, mortises andthe finished ghost land onthe real board, full size.

Where the cards go

workbench01assembly floor: the ghost2table saw10jointer11planer12miter saw13bandsaw14drill press15router table16xTool17boards200+taper jig 180–9WORKSPACE0 and 1 on the back corners of the bench setthe origin and keep the overlay level. 2 on thefloor places the full-size ghost for glue-up.10–29MACHINES AND JIGSOne card per machine. Scan it to see thatmachine’s settings and the parts it cuts next.200+PARTSA card clipped to each rough board travelswith the part through milling to glue-up,then gets reused on the next project.
workbench01boards200+2assembly floor: the ghost10table saw11jointer12planer13miter saw14bandsaw15drill press16router table17xTool18taper jig0–9WORKSPACE0 and 1 on the back corners of the bench setthe origin and keep the overlay level. 2 on thefloor places the full-size ghost for glue-up.10–29MACHINES AND JIGSOne card per machine. Scan it to see thatmachine’s settings and the parts it cuts next.200+PARTSA card clipped to each rough board travelswith the part through milling to glue-up,then gets reused on the next project.
Each card is engraved and cut on the xTool
Every rough board gets a card. Scan it and the headset lays out its parts.
Two cards on the bench set the origin and the scale.
Card 2 on the floor puts the full-size ghost where you glue up.
Rowmark LaserMax 2-ply, white over black, 1/16 in (part LM922-204), 12 x 24 in sheets12 · 24 anchor-tag cards at 8 x 10 in, two per sheet. Engrave on the xTool P3$144.00
Woodpeckers 1/8 in Baltic birch 12 x 24 in, box of 66 · Stiff backing for the bench, floor and machine tags$24.00
Scotch-Mount clear double-sided tape, 1 x 125 in1 · Laminate to ply backer$8.00

Black fill is the tag, red hairline is the cut, and the black square must measure exactly 6 in.

Waste less

Six rules the whole system is built around

  1. Make it once. Seeing a piece full size in the room before cutting anything catches the wrong size, the wrong proportion and the wrong wood. The best scrap is the one never made.
  2. Cut what you need. Fairy Ring nests parts on the sheet and writes the cut list from the model, so boards are bought to length and offcuts are tracked.
  3. Grow, don't buy foam. Packaging, inserts and insulating forms come from Mother instead of polystyrene.
  4. Loop the plastic. Failed prints and trimmed vacuum-formed sheet go to Lazarella. Brims and wax scrap go back to Queen Bee.
  5. Wash the formwork. Mud Diva's clay molds are slaked and reused, so the only waste from a concrete pour is the water.
  6. Small machines, small power. Every dancer is a desktop machine. The whole ring at once draws less than one shop dust collector.

The research

Studies behind the materials

The numbers behind those rules, from published studies.

8%of global CO₂

Cement is the binder in concrete, and making it releases about 8% of the world's CO₂. That's why Mud Diva prints thin, only where the part needs it, into clay formwork that is washed off and reused.
Chatham House, Making Concrete Change (2018) →

Grownnot made

Mycelium composites are fungal root grown through farm waste like hemp hurd. Reviews find them low-energy to make, light, insulating, and compostable at the end of their life, with weak points too: they soak up water and aren't structural. Mother uses them for shapes, packaging and insulating forms, sealed when they'll see water.
Jones et al., Materials & Design (2020), engineered mycelium composites review →

How you grow itchanges what you get

How the mycelium is fed, packed and pressed changes how strong, dense and water resistant it ends up. That's why Mother packs every mold by weight, and why the drying is tested.
Appels et al., Materials & Design (2019) →

3 to 80%+less energy

Turning waste plastic into filament at home, rather than making new filament in a factory, saved from 3% to over 80% of the energy, depending on where you live and how the power is made.
Kreiger, Mulder, Glover & Pearce, Journal of Cleaner Production (2014) →

½the energy

Pairing a recyclebot with a 3D printer in the same shop, so failed prints become new filament, cut the embodied energy of the parts in half and their cost to pennies. Lazarella is that loop.
Zhong & Pearce, Resources, Conservation & Recycling (2018) →

~9%of plastic is recycled

Only about 9% of the world's plastic waste is recycled. The rest is burned, landfilled or leaks into the environment. Keeping shop plastic in a loop is a small piece of that.
OECD, Global Plastics Outlook (2022) →

Thingoes further

Simple arithmetic: a 1 in board resawn as solid stock gives two faces, but sliced into veneer about 0.024 in thick it gives dozens of leaves, each one a full face. Figured and rare woods go furthest that way, which is why Drag Queen works in veneer.

Poundsnot tons

A hive makes only a pound or two of wax a year, and bees eat a lot of honey to make it. Queen Bee's wax is precious, so every brim and failed print gets remelted, and casting work leans on the 80 / 20 blend.
FAO, Value-added products from beekeeping →

Questions

The ones people ask first

Do I need to know CAD?

No. You talk and point. Fairy Ring turns that into a real CAD model with exact sizes. If you do know CAD, the model exports as STEP, STL and DXF.

Does it buy things on its own?

Never. It builds the cart and the total, and you decide.

What does it run on?

A gaming PC in the rig, two Meta Quest 3S headsets, and Claude for anything that isn't a simple command.

How exact is it?

The model is exact. Hand gestures land within a few millimetres, and you can always say the number instead.

Can the machines run while I'm away?

Some can. Handmaiden swaps plates and loads sheets so printers and the laser can work through a queue. Nothing with a flame or a spindle runs alone.

Is it safe?

Each machine has its own safety notes in its recipes. The rules everywhere: a fire extinguisher by the laser, gloves for cement and hot sheet, a mask for dust and grows, and never leave heat or a spindle running alone.

Is any of it built yet?

The software runs. The machines are designed with full parts lists and files, and they're being built now.

Meet the dancers →